Saltar al contenido principal

Introducción

This guide is intended for users who have Polaroid Z2300 with a malfunctioning control panel.

Partes

No se especificaron partes.

  1. Locate and remove the two 2.5 mm long screws on the bottom of the camera. Screw head: JIS J00 The screws are very small, be careful not to strip or lose them!
    • Locate and remove the two 2.5 mm long screws on the bottom of the camera.

    • Screw head: JIS J00

    • The screws are very small, be careful not to strip or lose them!

  2. Kits del Apple Watch

    Screen and battery repairs just got easier.

    Comprar Ahora

    Kits del Apple Watch

    Screen and battery repairs just got easier.

    Comprar Ahora
  3. Once the two screws are removed, flip the camera to back side up. Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed. Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed.
    • Once the two screws are removed, flip the camera to back side up.

    • Use a plastic opening tool to disengage the outer plastic trim until it can be safely removed.

  4. Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove. Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove.
    • Use a plastic opening tool to pop the control panel off, it should be easy to lift up and remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Bradley Marcum

Miembro Desde 01/11/18

217 Reputación

2 Guías creadas

Equipo

IUPUI, Team S2-G1, Harley Fall 2018 Miembro de IUPUI, Team S2-G1, Harley Fall 2018

IUPUI-HARLEY-F18S2G1

3 Miembros

2 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 103