Saltar al contenido principal

Introducción

When replacing the battery, realize that there is an adhesive which binds the battery to the camera. Given the adhesive, force might be required to remove the battery. However, you should be able to remove it with your hands.

  1. Open the paper door of the camera, then locate and remove the screws that are on the top and bottom edge of the inside of the camera.
    • Open the paper door of the camera, then locate and remove the screws that are on the top and bottom edge of the inside of the camera.

    • Screw head: Phillips, Screw length: 3mm

  2. Push the rear face plate from the short side nearest the screws you just removed towards the other short side of the camera.  It should slide forward and unlock the clips holding it in place. Then it should be easy to simply lift the rear face plate up and remove it.
    • Push the rear face plate from the short side nearest the screws you just removed towards the other short side of the camera. It should slide forward and unlock the clips holding it in place.

    • Then it should be easy to simply lift the rear face plate up and remove it.

  3. Locate and remove the four screws on the corners of the camera, they're quite small and may be difficult to remove. Screw head: Philips, Screw length: 5mm
    • Locate and remove the four screws on the corners of the camera, they're quite small and may be difficult to remove.

    • Screw head: Philips, Screw length: 5mm

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Once the screws are removed, flip the camera over Use a plastic opening tool to disengage the six clips  until the front face plate can be removed safely Use a plastic opening tool to disengage the six clips  until the front face plate can be removed safely
    • Once the screws are removed, flip the camera over

    • Use a plastic opening tool to disengage the six clips until the front face plate can be removed safely

  6. The cameras innards should now be accessible to you
    • The cameras innards should now be accessible to you

  7. Two foam strips and adhesive glue binds the battery to the camera.
    • Two foam strips and adhesive glue binds the battery to the camera.

  8. Remove the battery by lifting up the battery from the left corner. If you can not remove the battery with your hands, consider using a Plastic Opening Tool
    • Remove the battery by lifting up the battery from the left corner. If you can not remove the battery with your hands, consider using a Plastic Opening Tool

  9. Using your fingers, remove the five pin connector from the device. Using your fingers, remove the five pin connector from the device.
    • Using your fingers, remove the five pin connector from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Ian Colantuoni

Miembro Desde 09/02/16

379 Reputación

2 Guías creadas

Equipo

USF Tampa, Team 7-3, Cheng Spring 2016 Miembro de USF Tampa, Team 7-3, Cheng Spring 2016

USFT-CHENG-S16S7G3

4 Miembros

6 Guías creadas

Thank you so much for showing me how to do this. FYI: For the digital LCD screen version of this camera, there is only one screw to take out on that first step.

Can you tell me where I can buy the replacement battery for this camera? Thanks.

Tommy Li - Contestar

I would like to know where to buy it too.

Giorgina Nardi - Contestar

Same question need to know where to purchase a new battery and is this a common issue for the snap touch

Anita Guzman - Contestar

I also need a battery and it seems almost impossible to find one to buy. Please let me know if anybody has found a replacement battery that fits.

Jaco Botha - Contestar

Has anyone managed to find where to buy a replacement battery?

ajm.smith - Contestar

I also have the same problem as yall. Managed to find the battery spec on the battery

Fuji Electronics 7.4V, 1,100mAh, 8.14Wh Li-Polymer Battery

I still cannot find the battery itself for sale. It's very frustrating

mikey11onelove -

I have the same issue bad battery. I took the battery pack out and it is actually 2 battery’s taped together. The Specs are 3.7v 1100 mAh 4.07Wh each. Battery size is 4.5mm thick 35mm wide 62mm long which equals out to this part number (453562). I found a some batteries on eBay that are 402863 and ordered them. I will solder them to the original circuit board when they arrive and let you know if they work. If so I may make some battery packs since apparently nobody has them.

Nathan Carlson - Contestar

Nathan Carlson…thanks for that info! Will take the same tack…how did it go for you? Was it easy enough to bundle them and solder the 5 pin connector in place? Thanks. Like the others…I can't seem to locate a bundled 7.4 replacement.

Chris Queen - Contestar

Any followup reports or battery substitutes? NAthan Carlson, did you make the Ebay batteries work? did you order more and make battey packs for the Polaroid Snap?

thanks

laryball - Contestar

hi. i just purchased a snap touch and left it charging whole night. and when i woke up it was just 7%. tried charging it again and it will show up 28% then when i turned it on it became 5%. is this normal? or should i ask them to replace it? camera is with me for less than 24hrs only

leira perez - Contestar

since its a brand new device I would return and exchange..

Alexis Gregg - Contestar

Incomplete artical a… were is the Battery model p06309 (p653040) how sale it….is a mistery

fernando_montalto - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 18

Últimos 7 Días: 156

Últimos 30 Días: 606

Todo El Tiempo: 14,475