Saltar al contenido principal

Polaroid OneStep 2 Film roller Replacement

Qué necesitas

  1. Polaroid OneStep 2 Film roller Replacement, Film roller: paso 1, imagen 1 de 1
    • Pull the hinge button over to open the camera.

  2. Polaroid OneStep 2 Film roller Replacement: paso 2, imagen 1 de 2 Polaroid OneStep 2 Film roller Replacement: paso 2, imagen 2 de 2
    • Remove the left and right springs with a pair of tweezers.

  3. Polaroid OneStep 2 Film roller Replacement: paso 3, imagen 1 de 1
    • Lift out the top roller. The gold and black pieces will remain attached to the roller.

Conclusión

To reassemble your device, follow these instructions in reverse order.

12 personas más completaron esta guía.

8 comentarios

Hi @abbyboucher Thanks a lot for the tutorial! Do you know where can I find the spare parts like the rollers, springs or the small plastics parts that are around?My Onestep+ fell to the ground and I lost some of those small parts.

Thanks

Joe

Joe Var - Contestar

Thank you so much for this tutorial! I couldn’t find a place that would fix my camera and I literally just bought it a month ago! Already gutted that I couldn’t bring it on my Christmas holiday, I almost gave up when repair shops told me I would have to contact Polaroid.. thank you so so much!

drummagal7 - Contestar

I just dropped my camera and needed help finding spare parts. The roller is out of place and I don't know what steps to take.

Luis S -

thank you very very muttz

stinka007 - Contestar

any tips to put the springs back in place after taking one out?

ekw664 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 14

Ultimos 30 días: 86

Todo El Tiempo: 15,354