Saltar al contenido principal

Introducción

If you need to replace the film door latch, use this guide to access the inside of the camera. You may need to replace the latch if your camera will not close.

Partes

No se especificaron partes.

  1. Unscrew the four 5mm screws on the base of the camera using a Phillips #0 screwdriver. Unscrew the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.
    • Unscrew the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.

  2. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  3. Remove the bottom of the base and piece containing the film door latch.
    • Remove the bottom of the base and piece containing the film door latch.

Conclusión

To reassemble your device, follow these instructions in reverse order.

This doesn’t actually say anything about replacing the latch…

austin.ranson - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 17

Últimos 30 Días: 80

Todo El Tiempo: 478