Repara tus cosas Comunidad Tienda

Polaroid Cube Video Quality Switch Replacement

Introducción

This guide will walk you through the video quality switch on your Polaroid Cube. Make sure the device is completely powered off before disassembly, and that you have all of the required tools.

Qué necesitas

  1. Polaroid Cube Video Quality Switch Replacement, Battery: paso 1, imagen 1 de 1

    • Remove the SD card cover by twisting it using a Plastic Opening Tool

    Editar

  2. Polaroid Cube Video Quality Switch Replacement: paso 2, imagen 1 de 1

    • Use the Plastic Opening tool to pry off and remove the front cover.

    Editar

  3. Polaroid Cube Video Quality Switch Replacement: paso 3, imagen 1 de 1

    • Using a J00 head screwdriver, remove the four 3.27mm screws from the front of the camera near the lens.

    Editar

  4. Polaroid Cube Video Quality Switch Replacement: paso 4, imagen 1 de 2 Polaroid Cube Video Quality Switch Replacement: paso 4, imagen 2 de 2

    • Use the Plastic Opening Tool to pry open the shell of the camera.

    • There are four latches, one at each corner, that you will need to detach.

    Editar

  5. Polaroid Cube Video Quality Switch Replacement: paso 5, imagen 1 de 1

    • Remove shell from top and bottom of camera.

    Editar

  7. Polaroid Cube Video Quality Switch Replacement: paso 6, imagen 1 de 1

    • Remove the rubber seal wrapped around the camera.

    Editar

  8. Polaroid Cube Video Quality Switch Replacement: paso 7, imagen 1 de 2 Polaroid Cube Video Quality Switch Replacement: paso 7, imagen 2 de 2

    • Remove the tape wrapped around the battery.

    Editar

  9. Polaroid Cube Video Quality Switch Replacement: paso 8, imagen 1 de 3 Polaroid Cube Video Quality Switch Replacement: paso 8, imagen 2 de 3 Polaroid Cube Video Quality Switch Replacement: paso 8, imagen 3 de 3

    • Using a J00 head screwdriver, unscrew the four 3.46mm screws from the top and bottom circuit board.

    Editar

  10. Polaroid Cube Video Quality Switch Replacement: paso 9, imagen 1 de 2 Polaroid Cube Video Quality Switch Replacement: paso 9, imagen 2 de 2

    • Use the plastic opening tool to remove the circuit board that the battery is connected to.

    Editar

  11. Polaroid Cube Video Quality Switch Replacement: paso 10, imagen 1 de 1

    • Gently remove the battery pin connector from the circuit board.

    Editar

  12. Polaroid Cube Video Quality Switch Replacement, Video Quality Switch: paso 11, imagen 1 de 2 Polaroid Cube Video Quality Switch Replacement, Video Quality Switch: paso 11, imagen 2 de 2

    • Using a J00 head screwdriver, unscrew the 3.46mm screw that connects the top circuit board to the video quality switch board.

    Editar

  13. Polaroid Cube Video Quality Switch Replacement: paso 12, imagen 1 de 1

    • Remove the circuit board.

    Editar

  14. Polaroid Cube Video Quality Switch Replacement: paso 13, imagen 1 de 2 Polaroid Cube Video Quality Switch Replacement: paso 13, imagen 2 de 2

    • Using a J00 head screwdriver, unscrew the two 3.46mm screws connecting the video quality switch to the case.

    • Remove and replace the broken video quality switch.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Grant Baldwin

Miembro Desde 09/29/16

685 Reputación

2 Guías creadas

Insignias: 15

+ 12 más insignias

Equipo

IUPUI, Team 3-2, Harley Fall 2016 Miembro de IUPUI, Team 3-2, Harley Fall 2016

IUPUI-HARLEY-F16S3G2

4 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 858