Saltar al contenido principal

Polaroid Automatic 100 Spread Roll Replacement

Qué necesitas

  1. Polaroid Automatic 100 Spread Roll Replacement, Spread Roll: paso 1, imagen 1 de 2 Polaroid Automatic 100 Spread Roll Replacement, Spread Roll: paso 1, imagen 2 de 2
    • Push the lever on the bottom of the camera towards the left.

    • Open the rear door of the camera.

  2. Polaroid Automatic 100 Spread Roll Replacement: paso 2, imagen 1 de 3 Polaroid Automatic 100 Spread Roll Replacement: paso 2, imagen 2 de 3 Polaroid Automatic 100 Spread Roll Replacement: paso 2, imagen 3 de 3
    • Unlatch the red clip on the side.

    • Lift the rollers up.

    • Position the camera with the back cover closest to you.

  3. Polaroid Automatic 100 Spread Roll Replacement: paso 3, imagen 1 de 3 Polaroid Automatic 100 Spread Roll Replacement: paso 3, imagen 2 de 3 Polaroid Automatic 100 Spread Roll Replacement: paso 3, imagen 3 de 3
    • Remove the rear roll by using the plastic opening tool to take it off the metal frame.

    • Then remove the front roll by pushing away from you with the plastic opening tool.

  4. Polaroid Automatic 100 Spread Roll Replacement: paso 4, imagen 1 de 1
    Herramienta utilizada en este paso:
    Flathead 3/32" or 2.5 mm Screwdriver
    $5.49
    Comprar
    • Unscrew the three 2.5 mm screws (attached to the metal plate) with a 3.0 flathead screwdriver. Then take off the metal plate.

  5. Polaroid Automatic 100 Spread Roll Replacement: paso 5, imagen 1 de 1
    • Pull the support rod out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Katie Miller

Miembro Desde 04/14/15

680 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 4-3, Maness Spring 2015 Miembro de Cal Poly, Team 4-3, Maness Spring 2015

CPSU-MANESS-S15S4G3

4 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 657