Introducción

You will be using a metal spudger for this guide to remove the back cover. This is a prerequisite step for all further guides and will be important for all replacement steps. It is advised to be cautious when using the tools to avoid further damage to the equipment.

Partes

No se requieren partes.

  1. Use spudger to remove small panels to the immediate left and right of the camera. Use spudger to remove small panels to the immediate left and right of the camera.
    • Use spudger to remove small panels to the immediate left and right of the camera.

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Use spudger to begin lifting back cover. Then, create leverage and gently remove entire cover.
    • Use spudger to begin lifting back cover.

    • Then, create leverage and gently remove entire cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

IUPUI, Team S1-G4, Hovde Fall 2018 Miembro de IUPUI, Team S1-G4, Hovde Fall 2018

IUPUI-HOVDE-F18S1G4

3 Miembros

3 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 32