Repara tus cosas Comunidad Tienda

PlayStation Vita Right Shoulder Button Replacement

Introducción

This guide takes you through the process of installing the right shoulder button.

Qué necesitas

  1. PlayStation Vita Right Shoulder Button Replacement, Case Separation: paso 1, imagen 1 de 2 PlayStation Vita Right Shoulder Button Replacement, Case Separation: paso 1, imagen 2 de 2

    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    Traducir

  2. PlayStation Vita Right Shoulder Button Replacement: paso 2, imagen 1 de 3 PlayStation Vita Right Shoulder Button Replacement: paso 2, imagen 2 de 3 PlayStation Vita Right Shoulder Button Replacement: paso 2, imagen 3 de 3

    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    Traducir

  3. PlayStation Vita Right Shoulder Button Replacement: paso 3, imagen 1 de 2 PlayStation Vita Right Shoulder Button Replacement: paso 3, imagen 2 de 2

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    Traducir

  4. PlayStation Vita Right Shoulder Button Replacement: paso 4, imagen 1 de 3 PlayStation Vita Right Shoulder Button Replacement: paso 4, imagen 2 de 3 PlayStation Vita Right Shoulder Button Replacement: paso 4, imagen 3 de 3

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    Traducir

  5. PlayStation Vita Right Shoulder Button Replacement: paso 5, imagen 1 de 2 PlayStation Vita Right Shoulder Button Replacement: paso 5, imagen 2 de 2

    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    Traducir

  7. PlayStation Vita Right Shoulder Button Replacement: paso 6, imagen 1 de 1

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    Traducir

  8. PlayStation Vita Right Shoulder Button Replacement: paso 7, imagen 1 de 1

    • Free the battery cable by gently prying up on the connection with a spudger.

    Traducir

  9. PlayStation Vita Right Shoulder Button Replacement: paso 8, imagen 1 de 1

    • Separate the front and rear cases.

    Traducir

  10. PlayStation Vita Right Shoulder Button Replacement, Wireless Card: paso 9, imagen 1 de 3 PlayStation Vita Right Shoulder Button Replacement, Wireless Card: paso 9, imagen 2 de 3 PlayStation Vita Right Shoulder Button Replacement, Wireless Card: paso 9, imagen 3 de 3

    • Using the pointy end of the spudger, disconnect the three antenna cable connectors on top of the wireless card.

    • Deroute the antenna cables so that they are out of the wireless card casing. Rest the wires out of the way.

    Traducir

  11. PlayStation Vita Right Shoulder Button Replacement: paso 10, imagen 1 de 2 PlayStation Vita Right Shoulder Button Replacement: paso 10, imagen 2 de 2

    • Hook the spudger beneath the tab on the wireless card casing and release the tab.

    • Peel up and remove the wireless card casing.

    Traducir

  12. PlayStation Vita Right Shoulder Button Replacement: paso 11, imagen 1 de 2 PlayStation Vita Right Shoulder Button Replacement: paso 11, imagen 2 de 2

    • Remove the two 4.4mm Phillips #00 screws on the wireless card.

    • The wireless card will naturally pop out at an angle.

    • Pull out the wireless card.

    Traducir

  13. PlayStation Vita Right Shoulder Button Replacement, Right Shoulder Button: paso 12, imagen 1 de 3 PlayStation Vita Right Shoulder Button Replacement, Right Shoulder Button: paso 12, imagen 2 de 3 PlayStation Vita Right Shoulder Button Replacement, Right Shoulder Button: paso 12, imagen 3 de 3

    • Pry up the right shoulder button casing with a spudger and set it aside.

    Traducir

  14. PlayStation Vita Right Shoulder Button Replacement: paso 13, imagen 1 de 1

    • Remove the translucent, plastic right shoulder button cover.

    Traducir

  15. PlayStation Vita Right Shoulder Button Replacement: paso 14, imagen 1 de 3 PlayStation Vita Right Shoulder Button Replacement: paso 14, imagen 2 de 3 PlayStation Vita Right Shoulder Button Replacement: paso 14, imagen 3 de 3

    • Release the right shoulder button flex cable socket by using a spudger to gently pry open the tab.

    • Using tweezers, slide the flex cable out of the socket.

    Traducir

  16. PlayStation Vita Right Shoulder Button Replacement: paso 15, imagen 1 de 2 PlayStation Vita Right Shoulder Button Replacement: paso 15, imagen 2 de 2

    • Using a spudger, gently peel up the right shoulder button from the light adhesive connecting it to casing.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Brittany McCrigler

Miembro Desde 03/05/12

89,014 Reputación

131 Guías creadas

Insignias: 48

+ 45 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,816 Guías creadas

5 comentarios

Is anyone else experiencing the button getting stuck?

Fantasy Silicone Statuettes - Contestar

Yes, mine is getting stuck, too. I am hoping a replacement will solve this problem.

aseelau -

Has anyone experienced or seen an issue where the trigger button acts with the same functionality as the home button. Every time I press the right trigger it exits to home or exits the game.....help please

Daniel - Contestar

I followed this guide on my 3G vita in order to replace the right trigger cable. I found it wasn't necessary to remove the wireless card if anyone else finds that part tricky.

Caleb - Contestar

i am replacing the whole front part of my vita do to screen cracked and wont turn on, when i put the button back on, how would i do so to make it stick back on? would i need to reglue it or will it stick back on by itself?

Saul Calderon - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 24

Ultimos 30 días: 117

Todo El Tiempo: 14,433