Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Use this guide to remove or replace your Playstation 4 Slim’s plastic bottom cover.

Partes

No se especificaron partes.

  1. Locate the plastic warranty sticker next to the three ports on the side of the console. Remove the warranty sticker by peeling it off with any kind of spudger. Removing the warranty sticker will NOT cause your warranty to be null and void.
    • Locate the plastic warranty sticker next to the three ports on the side of the console.

    • Remove the warranty sticker by peeling it off with any kind of spudger.

    • Removing the warranty sticker will NOT cause your warranty to be null and void.

    Remove the screw directly to the left of that one in the picture as well. Should be silver.

    Elizabeth Johnson - Contestar

  2. Unscrew and remove the 5.0mm screw that was behind the sticker using a T8 security Torx screwdriver with a counter-clockwise motion. Unscrew and remove the 5.0mm screw that was behind the sticker using a T8 security Torx screwdriver with a counter-clockwise motion.
    • Unscrew and remove the 5.0mm screw that was behind the sticker using a T8 security Torx screwdriver with a counter-clockwise motion.

    Are you SURE that it’s counter-clockwise?

    The Stuff - Contestar

    Try T9. Fits better.

    Otter - Contestar

    T8 fits like a glove for me

    Daniel Henderson -

  3. Place the Playstation 4 Slim upside down with the side of the screw you just removed facing you. Pry up on the two corners that are facing you with your fingers. This may take a bit of force to open up and you will hear a fairly loud click when the bottom cover detaches.
    • Place the Playstation 4 Slim upside down with the side of the screw you just removed facing you.

    • Pry up on the two corners that are facing you with your fingers.

    • This may take a bit of force to open up and you will hear a fairly loud click when the bottom cover detaches.

    • Remove the bottom cover by sliding it towards the back corners and lifting up.

    It says to place it upside down, but didn't you do so in the previous step? I've been trying to unscrew the screw with my screwdriver that I got from here and if I had to had the system right side up, I'm afraid I might've stripped the screw from all the force I tried to use to get the screw out that will NOT budge. It didn't even move the slightest after removing the warranty sticker.

    Vidal Santos - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

22 personas más completaron esta guía.

Hernan Rodriguez

Miembro Desde 24/01/18

2,344 Reputación

3 Guías creadas

Equipo

Cal Poly, Team S19-G4, Livingston Winter 2018 Miembro de Cal Poly, Team S19-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S19G4

4 Miembros

26 Guías creadas

Wo kann man die Bodenplatte kaufen?

Emre Kaman - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 24

Ultimos 7 días: 123

Ultimos 30 días: 609

Todo El Tiempo: 16,446