Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

This guide will go through the steps necessary to remove the power supply unit from the PlayStation 4 Pro. Some disassembly is required for this removal, but it is one of the first things that can be removed from the PS4 Pro.

  1. Begin by flipping the console upside down. Use your finger to pull and snap off the plastic cover over the hard drive. Use your finger to pull and snap off the plastic cover over the hard drive.
    • Begin by flipping the console upside down.

    • Use your finger to pull and snap off the plastic cover over the hard drive.

  2. Use a screwdriver to remove the single Phillips #0 screw securing the hard drive caddy. Pull the hard drive caddy straight out.
    • Use a screwdriver to remove the single Phillips #0 screw securing the hard drive caddy.

    • Pull the hard drive caddy straight out.

  3. Flip the console right side up. Grip the two corners located at the front of the device. Pull upwards until a loud click is heard.
    • Flip the console right side up.

    • Grip the two corners located at the front of the device.

    • Pull upwards until a loud click is heard.

    • This may require a lot of force, so do not be afraid to get a little rough with your console.

    • After both corners detach, slide the cover backwards and lift off.

  4. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  5. Use a T8 Torx Security screwdriver to remove the five screws. Two 31mm screws. Three 10mm screws.
    • Use a T8 Torx Security screwdriver to remove the five screws.

    • Two 31mm screws.

    • Three 10mm screws.

    • Remove the metal plate.

  6. Flip the console to its back once again. Use a T8 Torx Security screwdriver to remove the three black 7mm screws in the back panel. Remove the bottom cover in the same way as the top cover. Grip on both sides, pull up until a click is heard and slide off.
    • Flip the console to its back once again.

    • Use a T8 Torx Security screwdriver to remove the three black 7mm screws in the back panel.

    • Remove the bottom cover in the same way as the top cover. Grip on both sides, pull up until a click is heard and slide off.

  7. Use a T8 Torx security screwdriver to remove the two 10mm silver screws from the metal plate. Use a T8 Torx security screwdriver to remove the two 10mm silver screws from the metal plate.
    • Use a T8 Torx security screwdriver to remove the two 10mm silver screws from the metal plate.

  8. Flip the console over to continue working on the top side. Place fingers underneath edge of power supply unit on both sides and pull straight up. Be careful not to pull too far, the assembly is still connected at one point.
    • Flip the console over to continue working on the top side.

    • Place fingers underneath edge of power supply unit on both sides and pull straight up.

    • Be careful not to pull too far, the assembly is still connected at one point.

    • Grip the connector behind the power supply and pull straight out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

17 personas más completaron esta guía.

Ashlyn Chow

Miembro Desde 25/04/17

1,515 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S21-G5, Livingston Spring 2017 Miembro de Cal Poly, Team S21-G5, Livingston Spring 2017

CPSU-LIVINGSTON-S17S21G5

4 Miembros

38 Guías creadas

Thank you soooo much for helping me save my ps4 pro guys! At the moment I love you like no one before! ;D

Fayce D D - Contestar

Can you go further in your tear-down and show us how to open up the power supply without breaking the PSU plastic case? Thanks. ^_^

Matt - Contestar

I bought a PS4 power supply CR 300 and my PS4 has an FR 300 power supply will they interchange

joseph fish - Contestar

My PlayStation Pro has a power supply FR 300 and the power supply I bought was a CR 300 power supply will they interchange

joseph fish - Contestar

Hola como saber que tipo de fuente vida mi ps4 pro modelo 7215b

Tomás Javier - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 45

Ultimos 7 días: 347

Ultimos 30 días: 1,696

Todo El Tiempo: 36,994