Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the three 9mm TR8 Torx Security screws on the back of the system.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the bottom panel by lifting the front piece up and sliding the panel towards the back.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the three 9mm TR9 Torx screws.
-
Remove the two 4cm Phillips head #1 screws.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 5 wire plug that is attached from the power supply to the motherboard.
-
You can now fully remove the power supply from the system.
-