Repara tus cosas Comunidad Tienda

PlayStation 3 Slim Top Cover Replacement

Introducción

Use this guide to remove the plastic top cover.

Qué necesitas

  1. PlayStation 3 Slim Top Cover Replacement, Top Cover: paso 1, imagen 1 de 1

    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

    Traducir

  2. PlayStation 3 Slim Top Cover Replacement: paso 2, imagen 1 de 2 PlayStation 3 Slim Top Cover Replacement: paso 2, imagen 2 de 2

    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

    Traducir

  4. PlayStation 3 Slim Top Cover Replacement: paso 3, imagen 1 de 1

    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

    Traducir

  5. PlayStation 3 Slim Top Cover Replacement: paso 4, imagen 1 de 1

    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

    Traducir

  6. PlayStation 3 Slim Top Cover Replacement: paso 5, imagen 1 de 2 PlayStation 3 Slim Top Cover Replacement: paso 5, imagen 2 de 2

    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

92 personas más completaron esta guía.

2 comentarios

No good mine a Sony.

james register - Contestar

Thank you this helped me so much!!!!

Megan Davis - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 62

Ultimos 30 días: 319

Todo El Tiempo: 73,305