Saltar al contenido principal

Introducción

You can use this method if you can't eject the stuck disk by the eject button and the eject hole. The PS3 slim on this video is model CECH-300X.

Full video you can see here:

More info about disassembling, you can find in PlayStation 3 Slim Teardown

Resumen del Video

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

  2. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.
    • Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.
    • First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

  5. In this case we have ... 4x disks. :) .
    • In this case we have ... 4x disks. :)

    • .

    • Did you do it successfully?

  6. Test the console before assembling. And don't forget to put the spindle disc magnet. Test the console before assembling. And don't forget to put the spindle disc magnet.
    • Test the console before assembling. And don't forget to put the spindle disc magnet.

Conclusión

To reassemble your device, follow these instructions in reverse order.

14 personas más completaron esta guía.

ZFix

Miembro Desde 09/12/13

164,369 Reputación

305 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

286 Miembros

808 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 9

Últimos 7 Días: 49

Últimos 30 Días: 138

Todo El Tiempo: 12,341