Introducción

If you want to replace the fan or clean the fan system - video tutorial:


Please SUBSCRIBE to my channel ツ

Resumen del Video

  1. Disconnect the fan cable and remove the nine screws from the bottom side. Disconnect the fan cable and remove the nine screws from the bottom side. Disconnect the fan cable and remove the nine screws from the bottom side.
    • Disconnect the fan cable and remove the nine screws from the bottom side.

  2. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield. Remove the two heat sink clamps and bottom shield, then gently separate  the motherboard off the top shield.
    • Remove the two heat sink clamps and bottom shield, then gently separate the motherboard off the top shield.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  4. Remove the four Phillips screws and lift the top shield. Remove the four Phillips screws and lift the top shield. Remove the four Phillips screws and lift the top shield.
    • Remove the four Phillips screws and lift the top shield.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

ZFix

Miembro Desde 09/12/13

162,554 Reputación

304 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

280 Miembros

784 Guías creadas

Awesome guide. Thank you so much. I did it, but now I just wonder what that white stuff was when I removed the motherboard. I think it's that thermal stuff people have been talking about and I suppose I have to replace that. I also hope that it's the fan that is what's causing my PS3 to say that it's overheating and shut off. I'm so glad you guys posted this. Great job. I rather do it myself than pay Sony an arm and a leg. Cheers!

chetacheez - Contestar

This is CPU / GPU thermal paste / compound. I recommend you Arctic MX-2, MX-4. It is very good and not expensive.

ZFix -

Ver Estadísticas:

Ultimas 24 Horas: 4

Últimos 7 Días: 25

Últimos 30 Días: 81

Todo El Tiempo: 7,952