Repara tus cosas Comunidad Tienda

Pioneer R1 Touch Screen Replacement

Introducción

This guide will walk you through the process of accessing and replacing your R1's touch screen/digitizer.

Qué necesitas

  1. Pioneer R1 Touch Screen Replacement, Touch Screen: paso 1, imagen 1 de 1

    • Insert your plastic spudger in the opening near the HDMI port.

    • Gently pry the back cover of the R1 from the the front by using the spudger along the edges.

    • Do not pull the back cover straight off the R1 as components of the speakers will be attached to both sides.

    Traducir

  2. Pioneer R1 Touch Screen Replacement: paso 2, imagen 1 de 1

    • Lay the R1 flat like an open book.

    • This will prevent the speakers from becoming disconnected from the motherboard.

    Traducir

  3. Pioneer R1 Touch Screen Replacement: paso 3, imagen 1 de 1

    • Remove the tape that is holding the motherboard to the display and covering the cable attachments.

    • Peel back just the end of this tape to free the front facing camera.

    Traducir

  5. Pioneer R1 Touch Screen Replacement: paso 4, imagen 1 de 1

    • Remove the three 4 mm screws along the base of the motherboard with a Phillips #00 Screwdriver.

    Traducir

  6. Pioneer R1 Touch Screen Replacement: paso 5, imagen 1 de 1

    • Disengage the two cable locks using your spudger or your finger nail.

    • Slide the cable free from the disengaged lock.

    • Do not pull across the cables as this may tear and permanently damage it.

    Traducir

  7. Pioneer R1 Touch Screen Replacement: paso 6, imagen 1 de 2 Pioneer R1 Touch Screen Replacement: paso 6, imagen 2 de 2

    • Insert your spudger between the LCD display and the touch screen.

    • Gently pry the LCD display from the the touchscreen by using the spudger along the edges.

    Traducir

  8. Pioneer R1 Touch Screen Replacement: paso 7, imagen 1 de 1

    • Once disengaged, remove the LCD display from the touchscreen.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Christopher Rosario

Miembro Desde 02/17/15

411 Reputación

4 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

San Diego State, Team 1-1, Sheppard Winter 2015 Miembro de San Diego State, Team 1-1, Sheppard Winter 2015

SDSU-SHEPPARD-W15S1G1

3 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 22

Todo El Tiempo: 2,619