Introducción
Esta guía mostrará instrucciones sobre cómo cambiar la pila en un mando del coche: Ford Escape 2013 - 2017. Esta guía paso a paso, fácil de usar, puede ayudarlo a reparar fácilmente su mando para continuar usandolo. El único elemento requerido para la restauración del mando es una pila de reemplazo. El proceso es breve, tardando solo unos minutos en completarse.
Qué necesitas
-
-
Con la llave original introduzca la parte delantera por la muesca que esta presente en el mando.
-
-
-
-
Inserte la llave en la muesca de la izquierda con el logotipo de FORD hacia arriba.
-
-
-
Retire la pila usada del mando.
I cannot get the back cover off
See my new comment above.
-
-
-
Inserte la pila nueva en la misma posición que la antigua y cierre el mando con la tapa trasera.
-
Para volver a montar su dispositivo, vuelva a colocar la cubierta posterior en el llavero y asegúrela firmemente.
Para volver a montar su dispositivo, vuelva a colocar la cubierta posterior en el llavero y asegúrela firmemente.
Cancelar: No complete esta guía.
36 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
¡ Alejandro Blanco Marijuan nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
16 comentarios
Good job. The training aid was clear and lacked nothing. Even had the battery type and a buy function which is a nice touch.
Excellent guide, Thanks for the details
Thanks for the help! Glad I just happened to have a battery and easy to follow instructions.
Easy Cheesy Lemon Squeezy! Thanks for the assist!
Nice tutorial! Here’s a good link if you have other Escape year models: https://fobbattery.com/vehicles/ford/esc...
Thank you so so much! I have a 2014 ford escape and at the worst time ever, it decided to alert me my fob battery was low. (C’mon life!) Worst time ever: 2 ER visits in a month and my hands are numb and tingling and difficult to use! I just completed your excellent guide and the task is DONE and I don’t have to bother my husband! I buy my button cell batts on ebay in bulk….great prices there. Thank you so much!! If I can do it with my issues, anyone can!
I’m glad I found this help. I would not have realized to remove the metal key first. Thanks.
The photo and description in steps 3 and 4 are misleading. Prying the notch as shown breaks the back cover sub assembly (Ford logo) instead of causing the back cover sub assembly to detach from the main fob body.
I found it easier to use my fingernail to pry around the joint between the back cover sub assembly and the main body to open the fob.
Once battery is replaced and the fob is closed, is there any (re)programming that needs to occur to sync the fob with the car?
Easy Peasy, Thank you!
For some reason I can’t get the cover to snap back together? The little “unlock button” you slide down to take apart the remote is down and won’t slide up to lock it together?