Philips TAS7505 USB-A & USB-C port Replacement

Introducción

This is a guide to show how to remove/replace the USB-A & USB-C port in your Philips TAS7505 Speaker. The only tools you need are a Phillips #0 Screwdriver and an iFixit Opening tool.

Notice the steps from our Outer Shell Disassembly guide are included, this is crucial to get the inner screws of the port.

Qué necesitas

Paso 1 Philips TAS7505 Outer Shell Disassembly

Philips TAS7505 USB-A & USB-C port Replacement, Philips TAS7505 Outer Shell Disassembly: paso 1, imagen 1 de 2

Philips TAS7505 USB-A & USB-C port Replacement, Philips TAS7505 Outer Shell Disassembly: paso 1, imagen 2 de 2

Make sure the speaker is turned off before you begin the disassembly.
Turn the speaker upside down. You will see a rubber base. Use an opening tool to lift up the sides to expose the screws.

Traducir

Paso 2

Philips TAS7505 USB-A & USB-C port Replacement: paso 2, imagen 3 de 3

There will be 4 exposed screws. Make sure to use the Phillips #0 Screwdriver.
When the screws are removed, you can use an opening tool to take off the plastic cover.

Traducir

Paso 3

Philips TAS7505 USB-A & USB-C port Replacement: paso 3, imagen 3 de 3

Now that you have removed this cover, there is another cover. This cover has a total of 9 screws that can be removed with a Philips #0 screwdriver.
Once all these screws are removed, you can take off the cover

Traducir

Paso 4

Philips TAS7505 USB-A & USB-C port Replacement: paso 4, imagen 3 de 3

You can now see the inside of the speaker but you aren't done yet.
Remove both rubber stands that hold up the device horizontally (one of these stands is a cover for the USB ports).

Traducir