Saltar al contenido principal

Introducción

This guide will show you how to remove the casing from your Philips Sonicare DiamondClean toothbrush.

Partes

No se especificaron partes.

  1. Pull the head from toothbrush. Pull the head from toothbrush.
    • Pull the head from toothbrush.

  2. Use a nylon spudger to pry the chrome cap at the bottom off. Use a nylon spudger to pry the chrome cap at the bottom off.
    • Use a nylon spudger to pry the chrome cap at the bottom off.

  3. Use a nylon spudger to release the black tabs on either side of internals.
    • Use a nylon spudger to release the black tabs on either side of internals.

  4. Put the metal head on a solid surface with handle perpendicular to the surface. Firmly, yet gently, push down until the internals start to slide out. Put the metal head on a solid surface with handle perpendicular to the surface. Firmly, yet gently, push down until the internals start to slide out.
    • Put the metal head on a solid surface with handle perpendicular to the surface. Firmly, yet gently, push down until the internals start to slide out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

IUPUI, Team S22-G1, Bayer Fall 2017 Miembro de IUPUI, Team S22-G1, Bayer Fall 2017

IUPUI-BAYER-F17S22G1

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 19

Ultimos 30 días: 106

Todo El Tiempo: 3,637