Repara tus cosas Comunidad Tienda

Philips SBA1060 Speaker Replacement

Introducción

The speakers are the two circular objects inside the device. This guide will detail the steps in how to replace a damaged speaker.

Qué necesitas

  1. Philips SBA1060 Speaker Replacement, Battery Casing: paso 1, imagen 1 de 1

    • Remove the back cover by sliding it off.

    • Remove the 3 AAA batteries.

    Editar

  2. Philips SBA1060 Speaker Replacement: paso 2, imagen 1 de 3 Philips SBA1060 Speaker Replacement: paso 2, imagen 2 de 3 Philips SBA1060 Speaker Replacement: paso 2, imagen 3 de 3

    • Unscrew the nine exterior screws on the back panel using a PH0-size Philips-head screwdriver.

    • A larger screwdriver head and more force may be required for damaged screws.

    • Remove the triangular end piece by pulling it straight off.

    Editar

  3. Philips SBA1060 Speaker Replacement: paso 3, imagen 1 de 2 Philips SBA1060 Speaker Replacement: paso 3, imagen 2 de 2

    • Remove the colored grill by sliding it off in the direction of the removed end piece.

    • Pry off the back battery panel with the plastic opening tool.

    • Be careful to avoid tearing any wires.

    Editar

  5. Philips SBA1060 Speaker Replacement, Speaker: paso 4, imagen 1 de 2 Philips SBA1060 Speaker Replacement, Speaker: paso 4, imagen 2 de 2

    • Remove the circuit board by unscrewing the two interior screws located on the circuit board.

    • Pull out the battery plugs from the circuit board by pulling out the plugs to fully remove the back panel from the rest of the speaker.

    Editar

  6. Philips SBA1060 Speaker Replacement: paso 5, imagen 1 de 2 Philips SBA1060 Speaker Replacement: paso 5, imagen 2 de 2

    • Locate the speaker needing replacing.

    • Remove the one screw holding the speaker in place with a PH0 size philips head screw driver.

    Editar

  7. Philips SBA1060 Speaker Replacement: paso 6, imagen 1 de 3 Philips SBA1060 Speaker Replacement: paso 6, imagen 2 de 3 Philips SBA1060 Speaker Replacement: paso 6, imagen 3 de 3

    • Score the glue that is holding the speaker in place with the spudger, and use your hands to pry off the speaker.

    Editar

  8. Philips SBA1060 Speaker Replacement: paso 7, imagen 1 de 2 Philips SBA1060 Speaker Replacement: paso 7, imagen 2 de 2

    • Using a non-conductive glue, carefully seal the speaker to the casing.

    • Follow the glue instructions as set by the manufacturers. Let the glue set the appropriate amount of time.

    • Reassemble the device

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 4 otros colaboradores

April Driscoll

Miembro Desde 10/21/13

321 Reputación

3 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

Clemson, Team 14-4, Benson Fall 2013 Miembro de Clemson, Team 14-4, Benson Fall 2013

CLEM-BENSON-F13S14G4

3 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 18

Todo El Tiempo: 1,704