Saltar al contenido principal

Philips Norelco BeardTrimmer 3100 Power Switch Replacement

Qué necesitas

  1. Philips Norelco BeardTrimmer 3100 Power Switch Replacement, Front and Back Panels: paso 1, imagen 1 de 1
    • Remove the comb from the top of the trimmer.

  2. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 2, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 2, imagen 2 de 2
    • Place your thumb underneath the blade and push upward to remove it.

  3. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 3, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 3, imagen 2 de 2
    • Hold trimmer towards you as shown in the diagram.

    • Insert your prying tool/metal spudger into the marked area.

  4. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 4, imagen 1 de 3 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 4, imagen 2 de 3 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 4, imagen 3 de 3
    • Apply gentle pressure and begin prying open the back panel.

    • Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

  5. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 5, imagen 1 de 3 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 5, imagen 2 de 3 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 5, imagen 3 de 3
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    • Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

  6. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 6, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 6, imagen 2 de 2
    • Hold the trimmer towards you.

    • Place the metal spudger tool in the marked area.

  7. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 7, imagen 1 de 1
    • Apply gentle pressure and begin prying the front panel.

    • Separate the front panel one notch at a time.

  8. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 8, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 8, imagen 2 de 2
    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

  9. Philips Norelco BeardTrimmer 3100 Power Switch Replacement, Power Switch: paso 9, imagen 1 de 1
    • Remove the front panel completely from the rest of the beard trimmer.

  10. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 10, imagen 1 de 1
    • Rotate the front panel so that the power switch is facing away from you.

  11. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 11, imagen 1 de 3 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 11, imagen 2 de 3 Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 11, imagen 3 de 3
    • Push the white plastic frame upward to remove it from the notch.

    • Pull the white plastic frame off the front panel of the beard trimmer.

  12. Philips Norelco BeardTrimmer 3100 Power Switch Replacement: paso 12, imagen 1 de 1
    • Remove the power switch from the front panel once the white plastic frame is removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Tamara Titus

Miembro Desde 09/03/15

133 Reputación

1 Guía escrita

Equipo

USF Tampa, Team 15-2, Blackwell Fall 2015 Miembro de USF Tampa, Team 15-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G2

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 41

Todo El Tiempo: 5,799