Repara tus cosas Comunidad Tienda

Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

In order to access the internal components of the beardtrimmer, the front and back panels must be removed. This guide will instruct you on the process.

Qué necesitas

  1. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement, Front and Back Panels: paso 1, imagen 1 de 1

    • Remove the comb from the top of the trimmer.

    Editar

  2. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 2, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 2, imagen 2 de 2

    • Place your thumb underneath the blade and push upward to remove it.

    Editar

  3. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 3, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 3, imagen 2 de 2

    • Hold trimmer towards you as shown in the diagram.

    • Insert your prying tool/metal spudger into the marked area.

    Editar

  5. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 4, imagen 1 de 3 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 4, imagen 2 de 3 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 4, imagen 3 de 3

    • Apply gentle pressure and begin prying open the back panel.

    • Separate the panel one notch at a time. Listen carefully as you're prying the panel apart and notice each individual notch release.

    Editar

  6. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 5, imagen 1 de 3 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 5, imagen 2 de 3 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 5, imagen 3 de 3

    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    • Pull the wires attached to the battery off of the power connectors before completely removing the back panel.

    Editar

  7. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 6, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 6, imagen 2 de 2

    • Hold the trimmer towards you.

    • Place the metal spudger tool in the marked area.

    Editar

  8. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 7, imagen 1 de 1

    • Apply gentle pressure and begin prying the front panel.

    • Separate the front panel one notch at a time.

    Editar

  9. Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 8, imagen 1 de 2 Philips Norelco BeardTrimmer 3100 Front and Back Panels Replacement: paso 8, imagen 2 de 2

    • Pull the trimmer apart using your hands once the panel is at least halfway apart.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Darren Chu

Miembro Desde 09/03/15

1,605 Reputación

3 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 15-2, Blackwell Fall 2015 Miembro de USF Tampa, Team 15-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S15G2

4 Miembros

8 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 5

Ultimos 30 días: 6

Todo El Tiempo: 84