Introducción

With constant use, the USB port can become broken or unresponsive. This guide will show you how to replace the USB port on your Philips DVP5992-F7.

Partes

No se requieren partes.

  1. Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.
    • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

    • Remove the 6.4 mm Phillips #1 screws on each side of the device.

  2. Remove the top plate of the DVD by firmly grasping the player on both sides.
    • Remove the top plate of the DVD by firmly grasping the player on both sides.

    • Shift the top plate towards the backside of the player.

    • Lift the back half of the top plate up to remove it from the player.

    • Locate the bundled cable connectors that attaches the USB port to the motherboard.

    • Firmly grasp the bundled cable connector and lift it from the motherboard.

    • Locate the area behind the USB port within the interior of the DVD Player.

    • Unscrew the two 6.35 mm Phillips #1 screws located behind the USB port.

    • Use the plastic opening tool to press down on the brass clip that holds the USB port in place.

    • Pull back the USB Port to remove it from the DVD player.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nathan Sarti

Miembro Desde 31/08/18

253 Reputación

2 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 32

Todo El Tiempo: 46