Saltar al contenido principal

Introducción

Over time, the HDMI port can become unresponsive. This guide will show you how to replace an unresponsive HDMI port on your Philips DVP5992-F7.

Partes

No se especificaron partes.

  1. Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver. Remove the 6.4 mm Phillips #1 screws on each side of the device. Remove the 6.4 mm Phillips #1 screws on each side of the device.
    • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

    • Remove the 6.4 mm Phillips #1 screws on each side of the device.

  2. Remove the top plate of the DVD by firmly grasping the player on both sides. Shift the top plate towards the backside of the player.
    • Remove the top plate of the DVD by firmly grasping the player on both sides.

    • Shift the top plate towards the backside of the player.

    • Lift the back half of the top plate up to remove it from the player.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Unplug the one ribbon wire and the five bundled cable connectors that are plugged into the motherboard. Unplug the one ribbon wire and the five bundled cable connectors that are plugged into the motherboard. Unplug the one ribbon wire and the five bundled cable connectors that are plugged into the motherboard.
    • Unplug the one ribbon wire and the five bundled cable connectors that are plugged into the motherboard.

  5. Remove the three 4.76 mm #1 Phillips head screws located on the back of the DVD player.
    • Remove the three 4.76 mm #1 Phillips head screws located on the back of the DVD player.

  6. Remove the two 7.94 mm #1 Phillips head screws from the motherboard.
    • Remove the two 7.94 mm #1 Phillips head screws from the motherboard.

  7. Remove the motherboard from the DVD player.
    • Remove the motherboard from the DVD player.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Nathan Sarti

Miembro Desde 31/08/18

253 Reputación

2 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 54