Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Eject the SmartBowl by pressing the button located at the front of the SmartFeeder base.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the food tub by twisting it counter-clockwise with both hands and lifting it up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the black plastic gasket from the top of the SmartFeeder by placing your fingers on the side of it and lifting up.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Flip over the SmartFeeder by using both hands.
-
Partially open the outer case of the SmartFeeder by wedging an iFixit Opening Tool on each side.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the SmartFeeder on its side and with one hand on the base, carefully pull out the central section.
-
Place the bottom piece of the device right-side up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove one 10 mm screw by using the Phillips #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the daughterboard out of the device and remove the three-prong connectors by using your hands.
-