Saltar al contenido principal

Pentax Optio WG-2 Shutter and Power Button Replacement

Qué necesitas

  1. Pentax Optio WG-2 Shutter and Power Button Replacement, Shutter and Power Button: paso 1, imagen 1 de 1
    • Use your finger to peel the grip off the top of the camera.

    • For best results, start from the right side of the camera, opposite from the buttons.

    • Once the grip is removed, you will most likely lose the water-tight seal.

  2. Pentax Optio WG-2 Shutter and Power Button Replacement: paso 2, imagen 1 de 1
    • Use the tweezers to remove the two buttons from the top of the camera.

    • The buttons may fall out while removing the grip.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 220