Saltar al contenido principal

Introducción

Replacement guide for the screen cover of the Pebble Time.

Partes

No se especificaron partes.

  1. Lay the watch flat on your workstation.
    • Lay the watch flat on your workstation.

  2. Use the metal spudger to carefully pull apart the screen cover from the case. Replace the metal spudger with a plastic opening tool to hold the cover open.
    • Use the metal spudger to carefully pull apart the screen cover from the case.

    • Replace the metal spudger with a plastic opening tool to hold the cover open.

  3. Use the metal spudger tool to carefully loosen the rest of the cover.
    • Use the metal spudger tool to carefully loosen the rest of the cover.

  4. Carefully, pull apart the cover with the plastic opening tool.
    • Carefully, pull apart the cover with the plastic opening tool.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Nicolas Hempe

Miembro Desde 15/02/17

1,316 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 1-3, Sullivan Spring 2017 Miembro de USF Tampa, Team 1-3, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G3

4 Miembros

7 Guías creadas

5 comentarios

What does one use to hold the screen on and reseal for waterproofing?

Shannon Oswald - Contestar

Using RTV silicon is problematic, I got some on my LCD and now I’m looking for a replacement Pebble.

Shannon Oswald - Contestar

HI I scratched my Crystal on my Pebble Time watch. Can the Crystal be buffed to get the scratch out??

Janice Pruett - Contestar

This is a brand new Pebble Time watch!!

Janice Pruett - Contestar

CONCLUSION

To reassemble your device, follow these instructions in reverse order.”

Yeah, what about an adhesive or sealant? Best practice for doing so?

Adam MacDonald - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 6

Ultimos 30 días: 22

Todo El Tiempo: 1,197