Repara tus cosas Comunidad Tienda

Pebble Time Circuit Board Replacement

Introducción

Replacement guide for the circuit board of the Pebble Time.

Qué necesitas

  1. Pebble Time Circuit Board Replacement, Screen Cover: paso 1, imagen 1 de 1

    • Lay the watch flat on your workstation.

    Traducir

  2. Pebble Time Circuit Board Replacement: paso 2, imagen 1 de 2 Pebble Time Circuit Board Replacement: paso 2, imagen 2 de 2

    • Use the metal spudger to carefully pull apart the screen cover from the case.

    • Replace the metal spudger with a plastic opening tool to hold the cover open.

    Traducir

  3. Pebble Time Circuit Board Replacement: paso 3, imagen 1 de 1

    • Use the metal spudger tool to carefully loosen the rest of the cover.

    Traducir

  4. Pebble Time Circuit Board Replacement: paso 4, imagen 1 de 1

    • Carefully, pull apart the cover with the plastic opening tool.

    Traducir

  6. Pebble Time Circuit Board Replacement, Screen: paso 5, imagen 1 de 1

    • Insert metal spudger into the side of the screen shown in the picture.

    Traducir

  7. Pebble Time Circuit Board Replacement: paso 6, imagen 1 de 1

    • Use the metal spudger to pry the screen up.

    Traducir

  8. Pebble Time Circuit Board Replacement: paso 7, imagen 1 de 3 Pebble Time Circuit Board Replacement: paso 7, imagen 2 de 3 Pebble Time Circuit Board Replacement: paso 7, imagen 3 de 3

    • Once screen is lifted, insert plastic opening tool between the screen connector and circuit board.

    • Disconnect the screen from the circuit board.

    Traducir

  9. Pebble Time Circuit Board Replacement, Circuit Board: paso 8, imagen 1 de 1

    • Keep the watch flat on your workstation.

    Traducir

  10. Pebble Time Circuit Board Replacement: paso 9, imagen 1 de 1

    • Locate the three screws on the circuit board.

    • Remove using the J000 Philips head screwdriver.

    Traducir

  11. Pebble Time Circuit Board Replacement: paso 10, imagen 1 de 3 Pebble Time Circuit Board Replacement: paso 10, imagen 2 de 3 Pebble Time Circuit Board Replacement: paso 10, imagen 3 de 3

    • Carefully disconnect the connector wire on the bottom left edge of the circuit board using a plastic opener tool.

    • Move apart the connector to expose the fourth screw.

    Traducir

  12. Pebble Time Circuit Board Replacement: paso 11, imagen 1 de 1

    • Remove the final screw from the circuit board with a J000 Philips head screwdriver.

    Traducir

  13. Pebble Time Circuit Board Replacement: paso 12, imagen 1 de 2 Pebble Time Circuit Board Replacement: paso 12, imagen 2 de 2

    • Turn the watch to the side and use the plastic opening tool to lift up the circuit board.

    • Remove the circuit board from the case.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Nicolas Hempe

Miembro Desde 02/15/17

1,444 Reputación

5 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

USF Tampa, Team 1-3, Sullivan Spring 2017 Miembro de USF Tampa, Team 1-3, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G3

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 7

Todo El Tiempo: 828