Repara tus cosas Comunidad Tienda

Pebble Time Battery Replacement

Introducción

Removal of battery for replacement.

Qué necesitas

  1. Pebble Time Battery Replacement, Screen Cover: paso 1, imagen 1 de 1

    • Lay the watch flat on your workstation.

    Traducir

  2. Pebble Time Battery Replacement: paso 2, imagen 1 de 2 Pebble Time Battery Replacement: paso 2, imagen 2 de 2

    • Use the metal spudger to carefully pull apart the screen cover from the case.

    • Replace the metal spudger with a plastic opening tool to hold the cover open.

    Traducir

  3. Pebble Time Battery Replacement: paso 3, imagen 1 de 1

    • Use the metal spudger tool to carefully loosen the rest of the cover.

    Traducir

  4. Pebble Time Battery Replacement: paso 4, imagen 1 de 1

    • Carefully, pull apart the cover with the plastic opening tool.

    Traducir

  5. Pebble Time Battery Replacement, Screen: paso 5, imagen 1 de 1

    • Insert metal spudger into the side of the screen shown in the picture.

    Traducir

  7. Pebble Time Battery Replacement: paso 6, imagen 1 de 1

    • Use the metal spudger to pry the screen up.

    Traducir

  8. Pebble Time Battery Replacement: paso 7, imagen 1 de 3 Pebble Time Battery Replacement: paso 7, imagen 2 de 3 Pebble Time Battery Replacement: paso 7, imagen 3 de 3

    • Once screen is lifted, insert plastic opening tool between the screen connector and circuit board.

    • Disconnect the screen from the circuit board.

    Traducir

  9. Pebble Time Battery Replacement, Circuit Board: paso 8, imagen 1 de 1

    • Keep the watch flat on your workstation.

    Traducir

  10. Pebble Time Battery Replacement: paso 9, imagen 1 de 1

    • Locate the three screws on the circuit board.

    • Remove using the J000 Philips head screwdriver.

    Traducir

  11. Pebble Time Battery Replacement: paso 10, imagen 1 de 3 Pebble Time Battery Replacement: paso 10, imagen 2 de 3 Pebble Time Battery Replacement: paso 10, imagen 3 de 3

    • Carefully disconnect the connector wire on the bottom left edge of the circuit board using a plastic opener tool.

    • Move apart the connector to expose the fourth screw.

    Traducir

  12. Pebble Time Battery Replacement: paso 11, imagen 1 de 1

    • Remove the final screw from the circuit board with a J000 Philips head screwdriver.

    Traducir

  13. Pebble Time Battery Replacement: paso 12, imagen 1 de 2 Pebble Time Battery Replacement: paso 12, imagen 2 de 2

    • Turn the watch to the side and use the plastic opening tool to lift up the circuit board.

    • Remove the circuit board from the case.

    Traducir

  14. Pebble Time Battery Replacement, Battery: paso 13, imagen 1 de 1

    • After removing the circuit board, the battery is located in the middle of the case.

    Traducir

  15. Pebble Time Battery Replacement: paso 14, imagen 1 de 2 Pebble Time Battery Replacement: paso 14, imagen 2 de 2

    • Locate the battery connector on the left side of the case.

    • Carefully disconnect the wire using a metal spudger.

    Traducir

  16. Pebble Time Battery Replacement: paso 15, imagen 1 de 2 Pebble Time Battery Replacement: paso 15, imagen 2 de 2

    • After disconnecting the battery use the plastic opening tool to lift the battery off of the case.

    • The battery might be glued to the case.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

33 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Nicolas Hempe

Miembro Desde 02/15/17

1,468 Reputación

5 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

USF Tampa, Team 1-3, Sullivan Spring 2017 Miembro de USF Tampa, Team 1-3, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G3

Miembros de 4

10 Guías creadas

11 comentarios

Where did you purchase the replacement battery?

Dimas Caparros - Contestar

Got mine on Amazon

kwojdak -

What is everyone using for sticky tape to hold the bezel/crystal on that will ensure the pebble is still waterproof?

Shannon Oswald - Contestar

Attempted this using RTV Silicon, and it is %#*@ difficult to not get it EVERYWHERE! I got some on my LCD, now I’m looking for another Pebble. Just use a little superglue on the outside and don’t figure on it being waterproof anymore - I guess.

Shannon Oswald - Contestar

There’s a lot of replacement battery on internet. Just search “150mAh P11G7T-01-S01”.

Xie Yanbo - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 13

Ultimos 7 días: 122

Ultimos 30 días: 501

Todo El Tiempo: 23,450