Introducción
Would you like to switch out the watch band on your Pebble Steel from leather to metal or vice versa? This guide will show you how.
Qué necesitas
-
-
Place the watch on its side to expose the side pins.
-
Use a 1.5 mm flathead screwdriver to unscrew the pin that is holding the band.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Equipo
USF Tampa, Team 1-7, Leahy Fall 2015 Miembro de USF Tampa, Team 1-7, Leahy Fall 2015
USFT-LEAHY-F15S1G7
3 Miembros
5 Guías creadas
Un comentario
One of my Pebble Steel pins comes out just as expected, but the other just spins, and doesn’t come out. Any ideas?
