Saltar al contenido principal

Parrot FLYPAD Joystick Replacement

Qué necesitas

  1. Parrot FLYPAD Joystick Replacement, Joystick: paso 1, imagen 1 de 1
    Herramienta utilizada en este paso:
    Magnetic Project Mat
    $19.95
    Comprar
    • Total of 6 Screws are located in the back of the controller.

    • Four 0.9mm T6 screws

    • Two 0.1mm T6 screws

    • Flip the Flypad over.

    • Remove the six screws using a T6 screwdriver.

    • Use a Magnetic Mat to prevent loss of screws. Set aside.

  2. Parrot FLYPAD Joystick Replacement: paso 2, imagen 1 de 1
    • Flip the Flypad over again and separate the front and back. Be sure to remove the foam adhesive that connects the front plate to the motherboard.

    • Be aware that the Buttons (L1,R1) may fall out. Remember to put them back in place during reassembly.

    • Use Ph0 tool to remove the screws holding the motherboard in place.

    • Gently remove the motherboard from the front plate.

  3. Parrot FLYPAD Joystick Replacement: paso 3, imagen 1 de 2 Parrot FLYPAD Joystick Replacement: paso 3, imagen 2 de 2
    • Pop the joysticks out by pulling gently.

  4. Parrot FLYPAD Joystick Replacement: paso 4, imagen 1 de 1
    • Unscrew and replace joystick caps for a more comfortable grip.

Conclusión

To reassemble your device, follow these instructions in reverse order.

HUY NGUYEN

Miembro Desde 04/10/17

376 Reputación

3 Guías creadas

Equipo

UW Tacoma, Team S3-G5, Liner Spring 2017 Miembro de UW Tacoma, Team S3-G5, Liner Spring 2017

UWT-LINER-S17S3G5

5 Miembros

3 Guías creadas

2 comentarios

Do you know where I can find replacement joystick caps like the one shown in Step 4, please?

cbeilstein - Contestar

Same question as above regarding joystick caps please

Alex - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 3

Todo El Tiempo: 687