Repara tus cosas Comunidad Tienda

Parrot AR.Drone 2.0 Propeller and Gear Replacement

Introducción

Use this guide to replace, propellers, shafts, and gears on a Parrot AR.Drone 2.0.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

Qué necesitas

Resumen del Video

  1. Parrot AR.Drone 2.0 Propeller and Gear Replacement, Propeller and Gear: paso 1, imagen 1 de 2 Parrot AR.Drone 2.0 Propeller and Gear Replacement, Propeller and Gear: paso 1, imagen 2 de 2

    • Remove the foam body.

    Traducir

  2. Parrot AR.Drone 2.0 Propeller and Gear Replacement: paso 2, imagen 1 de 2 Parrot AR.Drone 2.0 Propeller and Gear Replacement: paso 2, imagen 2 de 2

    • Disconnect the battery by pulling the two red wires apart.

    • Remove the battery by releasing the battery retaining straps.

    Traducir

    how do i put the clips back in?

    kuki vier - Contestar

    Are you referring to the clips in step three? If so, i highly recommend a hard, flat edged tool like a plastic spudger or flat head screw driver. Push is against the opposite side of the C clip that is opened with roughly the same force you applied to get it off. You have to be really careful that you push it directly horizontal or else you might damage the shaft or risk loosing the clip if it pops off.

    David Hoyt -

  4. Parrot AR.Drone 2.0 Propeller and Gear Replacement: paso 3, imagen 1 de 1

    • Remove the small retaining clip using a plastic opening tool.

    • Be careful as these clips can fly off and can be difficult to find.

    Traducir

  5. Parrot AR.Drone 2.0 Propeller and Gear Replacement: paso 4, imagen 1 de 3 Parrot AR.Drone 2.0 Propeller and Gear Replacement: paso 4, imagen 2 de 3 Parrot AR.Drone 2.0 Propeller and Gear Replacement: paso 4, imagen 3 de 3

    • The propeller, gear, and rod can be removed by simply lifting them off the motor.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Autor

con 7 otros colaboradores

David Hoyt

Miembro Desde 04/09/10

4,023 Reputación

43 Guías creadas

Insignias: 28

+ 25 más insignias

Equipo

Cal Poly, Team 25-89, Amido Spring 2010 Miembro de Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 Miembros

63 Guías creadas

Un comentario

any idea how to change the little gear?

Dar BS - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 19

Todo El Tiempo: 8,359