Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Use this guide to diagnose and replace a faulty motor on your Parrot AR.Drone 2.0.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

Resumen del Video

  1. Remove the foam body. Remove the foam body.
    • Remove the foam body.

  2. Disconnect the battery by pulling the two red wires apart. Remove the battery by releasing the battery retaining straps.
    • Disconnect the battery by pulling the two red wires apart.

    • Remove the battery by releasing the battery retaining straps.

  3. Remove the small retaining clip using a plastic opening tool.
    • Remove the small retaining clip using a plastic opening tool.

    • Be careful as these clips can fly off and can be difficult to find.

  4. SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación

    SALTEA LA ACTUALIZACIÓN

    Ahorra reparando con un kit todo en uno.

    Compra Kits de Reparación
  5. The propeller, gear, and rod can be removed by simply lifting them off the motor. The propeller, gear, and rod can be removed by simply lifting them off the motor. The propeller, gear, and rod can be removed by simply lifting them off the motor.
    • The propeller, gear, and rod can be removed by simply lifting them off the motor.

  6. Disconnect the connector at the bottom of the motor assembly. Disconnect the connector at the bottom of the motor assembly.
    • Disconnect the connector at the bottom of the motor assembly.

  7. Remove the three 5mm screws on the top of the motor assembly with a PH00 bit.
    • Remove the three 5mm screws on the top of the motor assembly with a PH00 bit.

  8. Remove the three 5mm screws on the bottom again using a PH00 bit.
    • Remove the three 5mm screws on the bottom again using a PH00 bit.

    • The three screws from the top are different from the three screws on the bottom.

  9. Carefully wiggle out the motor assembly out of the arm. Carefully wiggle out the motor assembly out of the arm.
    • Carefully wiggle out the motor assembly out of the arm.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

David Hoyt

Miembro Desde 09/04/10

3,846 Reputación

43 Guías creadas

Equipo

Cal Poly, Team 25-89, Amido Spring 2010 Miembro de Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 Miembros

52 Guías creadas

are the motors different on each side?

dbksoft - Contestar

I need to know this also. replaced cross.member but did not put motors in original spots now my drone goes crazy and erratic

Steven Maloney -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 7

Ultimos 30 días: 29

Todo El Tiempo: 4,721