Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently slide the backside phone cover off exposing the battery underneath.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully lift the battery up from where the spudger is pointed.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a PH000 screwdriver to remove the four 2 mm screws from each corner of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate the phone so the base is facing you.
-
Use spudger to separate phone casing and inside as shown.
-
Remove the casing carefully and set aside.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place phone with exposed motherboard facing you.
-
Use a PH000 screwdriver to remove the five 2 mm screws holding the camera in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully lift up the motherboard to expose the volume button.
-
-
Este paso está sin traducir. Ayuda a traducirlo
Herramienta utilizada en este paso:Tweezers$4.99-
After moving the motherboard out of the way, locate the volume button.
-
Grasp the volume button with tweezers and pull gently to remove.
-