Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently slide the backside phone cover off exposing the battery underneath.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully lift the battery up from where the spudger is pointed.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips screwdriver to remove the four 2mm Phillips #000 screws from each corner of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Rotate the phone so the base is facing you.
-
Use spudger to separate phone casing and inside as shown.
-
Remove the casing carefully and set aside the rest of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the spudger in the notch on the side of the speaker as shown.
-
Use the spudger to gently pry the speaker loose from its dock.
-
Remove the speaker fully from the phone.
-