Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Pantech Matrix Speaker Replacement

Qué necesitas

  1. Pantech Matrix Speaker Replacement, Phone Orientation: paso 1, imagen 1 de 1
    • Place phone with screen side facing toward you.

  2. Pantech Matrix Speaker Replacement, Phone Orientation: paso 2, imagen 1 de 1
    • Flip phone over so screen side is now facing down.

  3. Pantech Matrix Speaker Replacement, Remove Back Cover: paso 3, imagen 1 de 2 Pantech Matrix Speaker Replacement, Remove Back Cover: paso 3, imagen 2 de 2
    • Gently slide the backside phone cover off exposing the battery underneath.

  4. Pantech Matrix Speaker Replacement, Lift Battery: paso 4, imagen 1 de 1
    • Carefully lift the battery up from where the spudger is pointed.

  5. Pantech Matrix Speaker Replacement, Remove Battery: paso 5, imagen 1 de 1
    • Remove the battery from its dock.

  6. Pantech Matrix Speaker Replacement, Slide SIM Card Out: paso 6, imagen 1 de 3 Pantech Matrix Speaker Replacement, Slide SIM Card Out: paso 6, imagen 2 de 3 Pantech Matrix Speaker Replacement, Slide SIM Card Out: paso 6, imagen 3 de 3
    • Slide the SIM Card out of its dock.

  7. Pantech Matrix Speaker Replacement, Remove Phone Screws: paso 7, imagen 1 de 2 Pantech Matrix Speaker Replacement, Remove Phone Screws: paso 7, imagen 2 de 2
    • Use a Phillips screwdriver to remove the four 2mm Phillips #000 screws from each corner of the device.

  8. Pantech Matrix Speaker Replacement, Remove Phone Casing: paso 8, imagen 1 de 3 Pantech Matrix Speaker Replacement, Remove Phone Casing: paso 8, imagen 2 de 3 Pantech Matrix Speaker Replacement, Remove Phone Casing: paso 8, imagen 3 de 3
    • Rotate the phone so the base is facing you.

    • Use spudger to separate phone casing and inside as shown.

    • Remove the casing carefully and set aside the rest of the phone.

  9. Pantech Matrix Speaker Replacement, Remove Phone Speaker: paso 9, imagen 1 de 2 Pantech Matrix Speaker Replacement, Remove Phone Speaker: paso 9, imagen 2 de 2
    • Place the spudger in the notch on the side of the speaker as shown.

    • Use the spudger to gently pry the speaker loose from its dock.

    • Remove the speaker fully from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Zeel Patel

Miembro Desde 10/13/14

1,078 Reputación

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 168