Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Pantech Matrix Power Button Replacement

Qué necesitas

  1. Pantech Matrix Power Button Replacement, Phone Orientation: paso 1, imagen 1 de 1
    • Place phone with screen side facing toward you.

  2. Pantech Matrix Power Button Replacement, Phone Orientation: paso 2, imagen 1 de 1
    • Flip phone over so screen side is now facing down.

  3. Pantech Matrix Power Button Replacement, Remove Back Cover: paso 3, imagen 1 de 2 Pantech Matrix Power Button Replacement, Remove Back Cover: paso 3, imagen 2 de 2
    • Gently slide the backside phone cover off exposing the battery underneath.

  4. Pantech Matrix Power Button Replacement, Lift Battery: paso 4, imagen 1 de 1
    • Carefully lift the battery up from where the spudger is pointed.

  5. Pantech Matrix Power Button Replacement, Remove Battery: paso 5, imagen 1 de 1
    • Remove the battery from its dock.

  6. Pantech Matrix Power Button Replacement, Slide SIM Card Out: paso 6, imagen 1 de 3 Pantech Matrix Power Button Replacement, Slide SIM Card Out: paso 6, imagen 2 de 3 Pantech Matrix Power Button Replacement, Slide SIM Card Out: paso 6, imagen 3 de 3
    • Slide the SIM Card out of its dock.

  7. Pantech Matrix Power Button Replacement, Remove Phone Screws: paso 7, imagen 1 de 2 Pantech Matrix Power Button Replacement, Remove Phone Screws: paso 7, imagen 2 de 2
    • Use a Phillips screwdriver to remove the four 2mm Phillips #000 screws from each corner of the device.

  8. Pantech Matrix Power Button Replacement, Remove Phone Casing: paso 8, imagen 1 de 2 Pantech Matrix Power Button Replacement, Remove Phone Casing: paso 8, imagen 2 de 2
    • Rotate the phone so the base is facing you.

    • Use spudger to separate phone casing and inside as shown.

    • Remove the casing carefully and set aside.

  9. Pantech Matrix Power Button Replacement, Remove Camera Screws: paso 9, imagen 1 de 2 Pantech Matrix Power Button Replacement, Remove Camera Screws: paso 9, imagen 2 de 2
    • Place phone with exposed motherboard facing you.

    • Use a PH000 driver to remove the five 2 mm screws holding the camera in place.

  10. Pantech Matrix Power Button Replacement, Remove Motherboard: paso 10, imagen 1 de 1
    • Carefully lift up to motherboard to expose the power button.

  11. Pantech Matrix Power Button Replacement, Remove Power Button: paso 11, imagen 1 de 2 Pantech Matrix Power Button Replacement, Remove Power Button: paso 11, imagen 2 de 2
    • Locate the power button.

    • Grasp the power button with metal tweezers and pull gently to remove.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Zeel Patel

Miembro Desde 10/13/14

1,078 Reputación

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 311