Saltar al contenido principal

Introducción

You will need a Phillips screwdriver to remove the screws from the back of the phone, and a spudger to pry the plastic pieces from each other.

  1. Remove the battery.
    • Remove the battery.

    • Remove four Phillips screws.

  2. Pry up the plastic layer with a plastic opening tool.
    • Pry up the plastic layer with a plastic opening tool.

    • NOTE: Be careful that you do not separate the two plastic parts completely they are fragile and may break if pulled too hard.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Slide out the keyboard carefully in between the two layers.
    • Slide out the keyboard carefully in between the two layers.

  5. Insert the new keyboard in between the two layers carefully.
    • Insert the new keyboard in between the two layers carefully.

  6. Check if the edges are perfectly aligned between the two plastic layers after you insert the keyboard.
    • Check if the edges are perfectly aligned between the two plastic layers after you insert the keyboard.

  7. Press the two plastic layers back together.
    • Press the two plastic layers back together.

    • Reinsert the four screws and place the battery and cover back.

Conclusión

You now have a new keyboard.

2 personas más completaron esta guía.

Richard

Miembro Desde 13/02/14

116 Reputación

1 Guía escrita

Equipo

Ohio State, Team 1-4, Meza Spring 2014 Miembro de Ohio State, Team 1-4, Meza Spring 2014

OSU-MEZA-S14S1G4

4 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 188