Saltar al contenido principal
  1. Este paso está sin traducir. Ayuda a traducirlo

    Locate the bay door for the battery on the left side of the laptop.
    • Locate the bay door for the battery on the left side of the laptop.

  2. Este paso está sin traducir. Ayuda a traducirlo

    Slide the latch to the right and then down to unlock it. Pull out the battery.
    • Slide the latch to the right and then down to unlock it.

    • Pull out the battery.

  3. Este paso está sin traducir. Ayuda a traducirlo

    Begin by turning the laptop upside down with the handle towards you.
    • Begin by turning the laptop upside down with the handle towards you.

    • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

  4. Este paso está sin traducir. Ayuda a traducirlo

    Remove the panel and set it aside.
    • Remove the panel and set it aside.

    • Use a Phillips size 0 screwdriver to remove these 8 small screws.

  5. Este paso está sin traducir. Ayuda a traducirlo

    Use a Phillips size 1 screwdriver to remove the remaining 8 screws.
    • Use a Phillips size 1 screwdriver to remove the remaining 8 screws.

  6. Este paso está sin traducir. Ayuda a traducirlo

    Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive. Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.
    • Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.

  7. Este paso está sin traducir. Ayuda a traducirlo

    Be careful when lifting the cover as you may damage some connections.
    • Be careful when lifting the cover as you may damage some connections.

    • Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card.

  8. Este paso está sin traducir. Ayuda a traducirlo

    Now the back cover should be off and you can access the inside of the casing.
    • Now the back cover should be off and you can access the inside of the casing.

  9. Este paso está sin traducir. Ayuda a traducirlo

    Remove the black and white wires attached to the wireless card by simply pulling up.
    • Remove the black and white wires attached to the wireless card by simply pulling up.

  10. Este paso está sin traducir. Ayuda a traducirlo

    Peel back the black cover to expose the clips holding in the wireless card.
    • Peel back the black cover to expose the clips holding in the wireless card.

  11. Este paso está sin traducir. Ayuda a traducirlo

    Using a pair of plastic opening tools, push the two metal tabs away from the card.
    • Using a pair of plastic opening tools, push the two metal tabs away from the card.

  12. Este paso está sin traducir. Ayuda a traducirlo

    The wireless card should now easily disengage from the motherboard. Pull the card horizontally away from you to remove it from its housing.
    • The wireless card should now easily disengage from the motherboard.

    • Pull the card horizontally away from you to remove it from its housing.

Linea de Meta

2 personas más completaron esta guía.

Devon Augustus

Miembro Desde 12/04/10

103 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 27-93, Amido Spring 2010 Miembro de Cal Poly, Team 27-93, Amido Spring 2010

CPSU-AMIDO-S10S27G93

4 Miembros

24 Guías creadas

Un Comentario

what about the heatsinks of the processors? You don't fix the contact surface to the cover?

michael - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 6

Ultimos 30 días: 24

Todo El Tiempo: 14,212