Introducción

Use this guide to replace the camera's battery.

Partes

No se requieren partes.

  1. Locate the small, hinged door on the bottom of the camera.
    • Locate the small, hinged door on the bottom of the camera.

  2. Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).
    • Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).

    • The hinged door should swing open after unlocking.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.
    • Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.

    • This should release the battery.

  5. Pull the battery out of the camera. The battery should slide out easily.
    • Pull the battery out of the camera.

    • The battery should slide out easily.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 13-60, Johann Spring 2013 Miembro de Cal Poly, Team 13-60, Johann Spring 2013

CPSU-JOHANN-S13S13G60

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 6

Todo El Tiempo: 868