Repara tus cosas Comunidad Tienda

Panasonic KX-TG6021M Front Speaker Replacement

Introducción

This guide will show you how to replace the front speaker of the Panasonic KX-TG6021M.

Qué necesitas

  1. Panasonic KX-TG6021M Front Speaker Replacement, Battery: paso 1, imagen 1 de 2 Panasonic KX-TG6021M Front Speaker Replacement, Battery: paso 1, imagen 2 de 2

    • Slide the back cover down towards the bottom of the phone to remove.

    Editar

  2. Panasonic KX-TG6021M Front Speaker Replacement: paso 2, imagen 1 de 3 Panasonic KX-TG6021M Front Speaker Replacement: paso 2, imagen 2 de 3 Panasonic KX-TG6021M Front Speaker Replacement: paso 2, imagen 3 de 3

    • Pull the top of the battery towards you to remove it from the phone.

    Editar

  3. Panasonic KX-TG6021M Front Speaker Replacement, Front Panel: paso 3, imagen 1 de 2 Panasonic KX-TG6021M Front Speaker Replacement, Front Panel: paso 3, imagen 2 de 2

    • Unscrew the two screws located at the bottom of the phone.

    • Use a PH00 Phillips head to remove the 9 mm screws.

    Editar

  5. Panasonic KX-TG6021M Front Speaker Replacement: paso 4, imagen 1 de 3 Panasonic KX-TG6021M Front Speaker Replacement: paso 4, imagen 2 de 3 Panasonic KX-TG6021M Front Speaker Replacement: paso 4, imagen 3 de 3

    • Separate the back cover from the front cover by using a wedge.

    • Remove the back cover from the front cover by pulling them apart.

    Editar

  6. Panasonic KX-TG6021M Front Speaker Replacement: paso 5, imagen 1 de 1

    • Remove three screws on the motherboard.

    • Pull the phone face off of the motherboard.

    Editar

  7. Panasonic KX-TG6021M Front Speaker Replacement, Front Speaker: paso 6, imagen 1 de 1

    • Remove the front speaker housing by detaching it from the circuit board.

    Editar

  8. Panasonic KX-TG6021M Front Speaker Replacement: paso 7, imagen 1 de 1

    • Pop out the front speaker from the housing.

    Editar

  9. Panasonic KX-TG6021M Front Speaker Replacement: paso 8, imagen 1 de 1

    • Desolder the two connections and remove the wires from the circuit board.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

paul scruggs

Miembro Desde 10/24/16

177 Reputación

1 Guía escrita

Insignias: 8

+ 5 más insignias

Equipo

IUPUI, Team 3-1, Baechle Fall 2016 Miembro de IUPUI, Team 3-1, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G1

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 206