Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the dark transparent cap by gently pulling on it.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the back battery cap from the device by twisting it to the unlock position and pulling.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the black trimmer cap from the top of the device by gently pulling it.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a metal spudger to pry apart the silver plastic case.
-
Pull each side of the plastic case off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the rubber stopper from the top of the motor shaft by gently pulling it off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a pair of tweezers to remove the plastic cover of the motor shaft by pulling it away from the motor.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the motor from the case by sliding the cover off of it.
-
Cancelar: No complete esta guía.
6 personas más completaron esta guía.
Un comentario
My motor working intermittently. Took apart per instruction (very detailed, thank you). Everything loos good on the internals. I think my problem is succumb build up on the negative spring where it makes contact on negative end of battery. I scrapped it a little with tip of knife, working some what better. Need to find small wire brush to get in there and give it a good cleaning. Thank you for your guide :)