Introducción

This guide will show you how to replace the door covering the battery compartment. Overall this guide does not take much knowledge regarding disassembly, however you should take care to remember how the parts are situated before removing them.

Herramientas

Partes

No se requieren partes.

  1. Set the switch on the battery door to "open," and open the door. Set the switch on the battery door to "open," and open the door.
    • Set the switch on the battery door to "open," and open the door.

  2. At the left hand side, locate the head of the metal bar that holds the spring in place.
    • At the left hand side, locate the head of the metal bar that holds the spring in place.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Push the metal bar down using the metal tweezers.
    • Push the metal bar down using the metal tweezers.

  5. Pull the metal bar that holds the spring in place out.
    • Pull the metal bar that holds the spring in place out.

    • You can also use tweezers for this step, although we found it easier to just use our fingers.

  6. Remove the battery access door from the device.
    • Remove the battery access door from the device.

    • In order to keep the "springiness" of the door, be sure that the long arm of the spring is not over the hole for the battery.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Zhentao

Miembro Desde 30/01/18

229 Reputación

2 Guías creadas

Equipo

Baylor, Team S2-G3, Johnson Spring 2018 Miembro de Baylor, Team S2-G3, Johnson Spring 2018

BU-JOHNSON-S18S2G3

3 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 48