Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Palm m105 case replacment

Qué necesitas

  1. Palm m105 case replacment, Palm m105 case replacment: paso 1, imagen 1 de 1
    • Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.

  2. Palm m105 case replacment: paso 2, imagen 1 de 1
    • Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.

  3. Palm m105 case replacment: paso 3, imagen 1 de 1
    • Remove the batteries by opening the battery compartment on the back of the device. Remove one battery at a time.

  4. Palm m105 case replacment: paso 4, imagen 1 de 2 Palm m105 case replacment: paso 4, imagen 2 de 2
    • Using a T-5 Torx screwdriver, remove all four screws at the back of device by turning counterclockwise. Screwdriver located here.

  5. Palm m105 case replacment: paso 5, imagen 1 de 3 Palm m105 case replacment: paso 5, imagen 2 de 3 Palm m105 case replacment: paso 5, imagen 3 de 3
    • Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device.

  6. Palm m105 case replacment: paso 6, imagen 1 de 1
Conclusión

To reassemble your device, follow these instructions in reverse order.

Travis

Miembro Desde 10/04/11

4 Reputación

1 Guía escrita

Equipo

UW Stout, Team 1-3, Zhou Fall 2011 Miembro de UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 8

Todo El Tiempo: 779