Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the flat end of the spudger, carefully pry the black cover on the top from the blue front cover.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully remove the speaker from the back white cover by just pulling it gently. It is glued on.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the #00 5.75mm Phillips screws from the bottom of the motherboard. The front blue panel should fall right off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully pull back the brown cable holders and separate the screen from the motherboard.
-