Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Palm Treo 680 Back Panel Replacement

Introducción

This guide shows you how to take off the back panel to the Palm Treo 680 in order to reach the other components within side the phone.

Qué necesitas

  1. Palm Treo 680 Back Panel Replacement, Battery: paso 1, imagen 1 de 2 Palm Treo 680 Back Panel Replacement, Battery: paso 1, imagen 2 de 2

    • Remove the battery cover by pressing on the small rectangular button located on the back of the phone.

    Traducir

  2. Palm Treo 680 Back Panel Replacement: paso 2, imagen 1 de 1

    • Remove the battery by pulling it out towards you.

    Traducir

  4. Palm Treo 680 Back Panel Replacement, Back Panel: paso 3, imagen 1 de 2 Palm Treo 680 Back Panel Replacement, Back Panel: paso 3, imagen 2 de 2

    • Remove the stylus in order to access the screw.

    • Unscrew the 0.266 inch top-left screw using a T6 Torx screwdriver.

    Traducir

  5. Palm Treo 680 Back Panel Replacement: paso 4, imagen 1 de 2 Palm Treo 680 Back Panel Replacement: paso 4, imagen 2 de 2

    • Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.

    • Unscrew the 0.266 inch screw using the T6 Torx screwdriver.

    • If there is a red Palm sticker covering this screw, puncture it to access the screw.

    Traducir

  6. Palm Treo 680 Back Panel Replacement: paso 5, imagen 1 de 1

    • Remove the remaining two 0.266 inch screws at the bottom using the T6 screwdriver.

    Traducir

  7. Palm Treo 680 Back Panel Replacement: paso 6, imagen 1 de 3 Palm Treo 680 Back Panel Replacement: paso 6, imagen 2 de 3 Palm Treo 680 Back Panel Replacement: paso 6, imagen 3 de 3

    • Turn the phone so the screen is facing the right side.

    • Use a spudger to carefully separate the back panel from the front panel to access components inside the phone.

    • Separate the covers from the left side of the device as indicated in the picture.

    • The right side contains orange ribbons that are easily damaged.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 14 otros colaboradores

Maiya123

Miembro Desde 10/22/09

51 Reputación

6 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Cal Poly, Team 6-4, Maness Fall 2009 Miembro de Cal Poly, Team 6-4, Maness Fall 2009

CPSU-MANESS-F09S6G4

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 2,967