Saltar al contenido principal

Palm Treo 650 Case Replacement

Qué necesitas

  1. Palm Treo 650 Case Replacement, Battery and Stylus: paso 1, imagen 1 de 1
    • Position the phone so the screen faces down.

    • Remove the stylus found on the back of the phone.

  2. Palm Treo 650 Case Replacement: paso 2, imagen 1 de 1
    • Hold the button in the middle of the phone's back to remove the battery cover.

    • Slide the cover down to remove it, and set the cover aside.

  3. Palm Treo 650 Case Replacement: paso 3, imagen 1 de 2 Palm Treo 650 Case Replacement: paso 3, imagen 2 de 2
    • Lift the edge of the battery, separating contact points, and pull out as pictured.

  4. Palm Treo 650 Case Replacement, Case: paso 4, imagen 1 de 1
    • Remove the round, rubber cover to expose a screw that will be removed in the next step.

  5. Palm Treo 650 Case Replacement: paso 5, imagen 1 de 2 Palm Treo 650 Case Replacement: paso 5, imagen 2 de 2
    • Remove the six 6.9 mm screws as pictured with a T5 Torx screwdriver.

    • Remove the single 9.8 mm screw next to the antenna on the back plate, using a Phillips #00 screwdriver.

  6. Palm Treo 650 Case Replacement: paso 6, imagen 1 de 1
    • Pull the antenna outward to remove the antenna from the body of the phone.

  7. Palm Treo 650 Case Replacement: paso 7, imagen 1 de 2 Palm Treo 650 Case Replacement: paso 7, imagen 2 de 2
    • Pry the back cover off using an iFixit opening tool.

    • Several small clips on the inside attach to the back cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

mmedrano

Miembro Desde 11/15/09

95 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 19-3, Maness Fall 2009 Miembro de Cal Poly, Team 19-3, Maness Fall 2009

CPSU-MANESS-F09S19G3

4 Miembros

18 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 3,070