Saltar al contenido principal

Palm Treo 600 Keyboard Replacement

Qué necesitas

  1. Palm Treo 600 Keyboard Replacement, Back Case: paso 1, imagen 1 de 1
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Palm Treo 600 Keyboard Replacement: paso 2, imagen 1 de 2 Palm Treo 600 Keyboard Replacement: paso 2, imagen 2 de 2
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. Palm Treo 600 Keyboard Replacement: paso 3, imagen 1 de 2 Palm Treo 600 Keyboard Replacement: paso 3, imagen 2 de 2
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  4. Palm Treo 600 Keyboard Replacement, Front Case: paso 4, imagen 1 de 2 Palm Treo 600 Keyboard Replacement, Front Case: paso 4, imagen 2 de 2
    • Using a T6 Torx Screwdriver, remove the two screws.

    • The motherboard will now be loose from the front case.

  5. Palm Treo 600 Keyboard Replacement, Keyboard: paso 5, imagen 1 de 1
    • Using the spudger, flip open the clasp that holds the data ribbon in place.

  6. Palm Treo 600 Keyboard Replacement: paso 6, imagen 1 de 1
    • Pull out the ribbon.

    • The keyboard will disconnect from the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 13-23, Maness Winter 2010 Miembro de Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 1,484