Repara tus cosas Comunidad Tienda

Palm Pre 2 Motherboard Replacement

Introducción

The following guide will show the reader how to properly remove the motherboard from the Palm Pre 2.

Qué necesitas

  1. Palm Pre 2 Motherboard Replacement, Motherboard: paso 1, imagen 1 de 2 Palm Pre 2 Motherboard Replacement, Motherboard: paso 1, imagen 2 de 2

    • Make sure your Palm Pre 2 is turned off before taking apart the phone.

    • Snap off the back panel to reveal the battery using the opening tool.

    Editar

  2. Palm Pre 2 Motherboard Replacement: paso 2, imagen 1 de 3 Palm Pre 2 Motherboard Replacement: paso 2, imagen 2 de 3 Palm Pre 2 Motherboard Replacement: paso 2, imagen 3 de 3

    • Pull on the tab to remove the battery.

    Editar

  3. Palm Pre 2 Motherboard Replacement: paso 3, imagen 1 de 2 Palm Pre 2 Motherboard Replacement: paso 3, imagen 2 de 2

    • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

    Editar

  5. Palm Pre 2 Motherboard Replacement: paso 4, imagen 1 de 2 Palm Pre 2 Motherboard Replacement: paso 4, imagen 2 de 2

    • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas (Reference the red box in the image).

    • Use tweezers to remove the two antennas from the keypad control board.

    Editar

  6. Palm Pre 2 Motherboard Replacement: paso 5, imagen 1 de 2 Palm Pre 2 Motherboard Replacement: paso 5, imagen 2 de 2

    • Use the opening tool to pry off the (black and yellow) back frame.

    Editar

  7. Palm Pre 2 Motherboard Replacement: paso 6, imagen 1 de 3 Palm Pre 2 Motherboard Replacement: paso 6, imagen 2 de 3 Palm Pre 2 Motherboard Replacement: paso 6, imagen 3 de 3

    • Use the opening tool to remove the panel on the main part of the phone.

    • Use the tweezers to get access to remove the panel giving access to the cable connectors.

    • Remove the two ribbon cable connectors using the tweezers.

    Editar

  8. Palm Pre 2 Motherboard Replacement: paso 7, imagen 1 de 1

    • Use tweezers to separate the keyboard from the phone.

    Editar

  9. Palm Pre 2 Motherboard Replacement: paso 8, imagen 1 de 2 Palm Pre 2 Motherboard Replacement: paso 8, imagen 2 de 2

    • Use a Phillips #0 screwdriver to remove the remaining 4 screws from the main portion of the phone.

    • Use an opening tool to remove the motherboard.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Cole Simmerman

Miembro Desde 01/08/18

160 Reputación

1 Guía escrita

Insignias: 2

Equipo

IUPUI, Team S1-G6, Freund Spring 2018 Miembro de IUPUI, Team S1-G6, Freund Spring 2018

IUPUI-FREUND-S18S1G6

2 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 258