Introducción

Be careful with the screen if cracked, it may have sharp pieces.

Partes

No se requieren partes.

Unscrew the three screws on the back of the Palm Pilot.
  • Unscrew the three screws on the back of the Palm Pilot.

Agregar Comentario

Pull the back cover from the bottom of the device and separate the interlocking tabs on the top to remove the back cover.
  • Pull the back cover from the bottom of the device and separate the interlocking tabs on the top to remove the back cover.

Agregar Comentario

  • The front plastic cover is now free to be removed from the rest of the device.

Agregar Comentario

  • The keypad is now free to be removed from the rest of the device.

Agregar Comentario

  • Looking at the back of the device hold one of the white tabs on the ribbon cable connector down and use tweezers to push in the other white tab toward the device at the same time.

Agregar Comentario

  • The ribbon cable is now loose. Use the tweezers to carefully slide the ribbon cable out of the connector.

Agregar Comentario

  • The screen is now disconnected from the rest of the device and can now be removed.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kevin Santos

Miembro Desde 09/03/12

1 Reputación

4 Guías creadas

Equipo

Clemson, Team 2-4, Benson Spring 2012 Miembro de Clemson, Team 2-4, Benson Spring 2012

CLEM-BENSON-S12S2G4

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 3

Todo El Tiempo: 1,082