Repara tus cosas Comunidad Tienda

Palm P101UNA Camera Screen Replacement

Introducción

The screen protects the camera from external damage, but in doing so can itself become damaged. This can be remedied by removing the screen and putting in a new one.

Qué necesitas

  1. Palm P101UNA Camera Screen Replacement, Battery: paso 1, imagen 1 de 1

    • Push in the button at the bottom of the phone, and lift the back cap off.

    Editar

  2. Palm P101UNA Camera Screen Replacement: paso 2, imagen 1 de 1

    • Remove the battery by pulling out the little tab.

    Editar

  4. Palm P101UNA Camera Screen Replacement, Camera Screen: paso 3, imagen 1 de 1

    • Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

    Editar

  5. Palm P101UNA Camera Screen Replacement: paso 4, imagen 1 de 1

    • Using the spudger, remove the inner case from the phone.

    Editar

  6. Palm P101UNA Camera Screen Replacement: paso 5, imagen 1 de 1

    • Now place your finger on the outside of the screen and slowly apply pressure.

    Editar

  7. Palm P101UNA Camera Screen Replacement: paso 6, imagen 1 de 1

    • While applying pressure, use your tweezers to remove the screen from the inner casing.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

ironwill13791

Miembro Desde 10/30/13

509 Reputación

5 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 Miembro de UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G2

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 342